Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsive cooking control of gas cooktops, but requires an electric oven to bake? Discover a dual-fuel range cooker that offers the best of both worlds.
Gas cooktops are preferred by many home chefs who have expertise in the kitchen because of their superior temperature control. They also allow the use of advanced cooking techniques such as charcoaling. These cooktops can be expensive, particularly if you require an additional gas hook-up as well as an electrician for installation.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas cooker and an electric oven), you will need an electrical outlet of 13 amps. The plug must also be hard-wired by a qualified electrician into the cooker ring.
This ensures that the current passing through the plug is safe and not too high, which could create an electrical fire danger. The plug has an electrical fuse that regulates the current. The fuse blows as soon as the current flows through it beyond its capacity. This safeguards the appliance from an over-charge of electricity.
The fuse is rated at 13 amps, which is shown on top of the plug. This is the maximum amount of current that the plug can pass without damaging the appliance or causing heat to the socket. It is essential to ensure that when replacing fuses, you always use the same rated amperage as the original. You run the risk of overheating a socket if you replace a fuse that has a different rating.
A 13 amp fuse is likely to be a ceramic one that is extremely robust and able to withstand the high temperatures produced by the range cooker. Ceramic is also fire-resistant, which makes it a more suitable option than other kinds of fuse.
There are a variety of ways to install a 13 amp plug. The plug can be connected to a live socket using a screw or plastic jaw cord clamp. The clamp must be tightened after the plug is securely pushed into position.
Some plugs have a diagram of wiring on cardboard over the pins, and these must be removed prior to connecting the wires. The wires must be trimmed to the proper length, because when they are too long they could be crushed when the plug covers are replaced. The earth wire should be the longest to connect it before the line and neutral pins.
How do I install an outlet with 13amps?
The majority of dual fuel range cookers in the UK are wired to a 13 amp plug socket and this is crucial because ovens draw a substantial amount of current and standard plug sockets are designed to handle 10 amps.
Generally speaking new appliances should be equipped with a plug at the point of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug connected and this could be the reason for the issue.
The first thing to consider when connecting a cooker with an existing plug socket is to check that the rating of the fuse in the fuse box is similar to that of the plug. This is important because an incorrectly-sized fuse can be dangerous.
It is also recommended that the fuse has been completely seated into the cartridge, and there isn't any excessive movement. Next up is to prepare the flex to be used. First remove the sheathing from the flex to expose the three insulated conductors within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) with a utility knife without penetrating the individual insulated conductors. The nick should be wide enough to allow the sheathing and cable to separate as the sheathing is pulled back. Finally, cut off the excess sheathing, leaving about 40mm extending beyond the flexing end.
The flex is positioned over the plug, with the earth terminal at the top, and the live and neutral terminals at the bottom. Using the coloured conductors to guide you, the sheathing is then removed from each pin and the internal cable is then plugged to the appropriate terminal by using the cord grip. If the plug has an screw-type clamp for cords loosen it and pull back the insulation to expose the copper conductors. Then, connect each conductor that is insulated to the appropriate terminal (starting with the earth first, then neutral and finally the live) using the channel they are running through the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 3kw at 230 volts is. This is a lot of power, but the standard fuse on the UK plugtop won't fail until the cable reaches a hazardous temperature. A damaged plug or socket can cause a fire so it's important to be aware of the amount of power you use particularly in the kitchen.
The fuse inside the plugtops are made of ceramic, around 25mm long and 240V mains rated. They'll feature the BS kitemark or similar marking on the side, and they contain sand. There are also cheaper glass or plastic alternatives, however they shouldn't be used with a live plug, unless you want to blow up the fuse and possibly get electrocuted!
In the UK the majority of dual fuel range cookers are hardwired. They cannot be plugged directly into an outlet on the wall. They are usually connected via a dedicated cooker circuit, which is only suitable for appliances that can handle up to 20 amps.
Check the ring circuit at your home using the fuse box, or ask an electrician nearby. They will be able to inform you if the sockets in your home are connected to the same ring or separate and if there is a separate circuit for your oven.
If you're in the market for a new dual-fuel range cooker the size of your kitchen is a crucial factor to take into account. We have a large selection of cookers to suit any space, including compact 50 - 60cm dual fuel models as well as huge 90cm + double oven options from top brands like Rangemaster and StovesAreUs.
We also have a broad variety of multifunction electric and gas cookers. These multi-functional appliances let you cook a variety of dishes, including curries, pasta, and casseroles!
range style cookers dual fuel offers a broad selection of Cookers. Browse our online collection or stop by our store to see the range. We offer free delivery and home installation on selected range cookers, and we also offer flexible payment options. If you have any queries or concerns, our staff are on hand to help - just drop us an email or give us a ring. Credit is subjected to the status of the account, and terms and condition apply.
What is the maximum draw of the switch on a cooker?
There is a lot of confusion about the maximum current draw for a cooker switch. The fact is, most cookers aren't made to connect to an ordinary socket, but rather are wired hard and fed into an oven ring circuit. This is because they typically consume more than 20 amps when both the electric and gas hob oven are in use.
There aren't any dual fuel range cookers that can be installed in a standard socket, since this could pose a significant fire risk and infringe electrical regulations. A licensed electrician should install new electrics in the kitchen to the cooker. They will also ensure that the load of the oven and hob do not exceed the circuit's capacity.
Dual fuel range cookers mix the flexibility of a gas stove with the precision and precision of an electric oven. This is the reason they are popular among cooks and chefs alike. If you're looking to test different cooking techniques, such as searing and charcoaling, a dual fuel range cooker is the ideal choice.
When purchasing a new range cooktop, you need to be aware of a number of aspects that include size, performance, and price. In addition, you will be required to ensure that your house has the right gas hook-up for the appliance. If you aren't sure, it is best to book a Gas Safe engineer to inspect your property before installation.
Currys dual fuel range cookers come in a variety of models to meet all budgets. From affordable models by Indesit and Zanussi to our own Essentials collection. If you are looking for something more sophisticated, we stock a variety of top JennAir models, which feature a number innovative features.
When purchasing a new dual fuel range cooker, it's crucial to consult the manual of the owner for specific information on the electrical and gas requirements. You will require an electric connection to your home. A plumber might be required to connect it for you. Depending on your home you'll also need to make sure that you have a cooker ring circuit that is installed and endorsed by a qualified electrician.